Claim reasons: Cover is not automatically elevated/does not stay elevatedUpdated 4 months ago
The cover does not automatically go up and instead hangs in the middle or slides down to the bottom.
TROUBLESHOOTING
Help the cover rise fully by gently pushing it upwards. Then close it again and try to reopen.
Check how the carbonator is stored when not in use. The cover should remain open and in the upright position at all times when unused, to ensure the gas springs stay properly exercised.
Important! New units, straight out of the box, can act like this due to being sent in the ‘down’ position – in this case, pushing the hood up usually fixes the issue.
Examples

🞴 If the issue persists after designated troubleshooting, the machine has to be replaced with the reason code: cover is not automatically elevated/does not stay elevated.